Manualsbrain.com
  1. Manuels
  2. Marques
  3. Toshiba
  4. IK - HD1C
  5. Manuel D’Utilisation

Toshiba IK - HD1C Manuel D’Utilisation

Télécharger
Page de 35
33
Power supply 
12V DC
㫧10%
Power consumption
Approx. 10.3 W (including a camera head) 
Pick-up system
RGB, 3CCD, Micro prism system 
Image sensor 
1/3 inch,  IT
䋭CCD
Output pixels
Horizontal : 1920, Vertical : 1080
Scanning system 
2
䋺1 interlace 
Scan frequency 
[59.94 Hz setting]   Horizontal : 33.716 kHz, Vertical : 59.94 Hz
[60 Hz setting]        Horizontal : 33.75 kHz,   Vertical : 60 Hz
[59.94 Hz setting]   Horizontal : 33.716 kHz 
㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[60 Hz setting]        Horizontal : 33.75 kHz 
㫧35 ppm, Vertical : 60 Hz 㫧35 ppm
[59.94 Hz setting]   Horizontal : 33.716 kHz 
㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[60 Hz setting]        Horizontal : 33.75 kHz 
㫧35 ppm, Vertical : 60 Hz 㫧35 ppm
Sync system
Internal/External (Automatic switching) 
Horizontal resolution 
800TV lines standard
Vertical resolution 
800TV lines standard
Sensitivity 
F6.8 standard
䋨2000 lx, 3000 K䋩
Minimum illumination 
13 lx
䋨F2.2, sensitivity 䋫18 dB䋩
SN ratio
56 dB standard (gain 0 dB, DNR OFF)
Ambient temperature 
(32
㫦
㫦F) 
to 40
0
F to 104
㷄
㷄
Ambient humidity
Less than 90% 
Weight
Approx. 730 g (1.61 lbs)
External dimension 
(4.33”(W)
㬍1.57”(H)㬍7.32”(D))           (excluding protrusions)  
110(W)
㬍40(H)㬍186(D) mm
Scene file(user memories)
5 files (A, B, C, D, E)
White balance 
ATW
䋨Automatic tracing balance䋩, AWB䋨Automatic white balance䋩
MANUAL
䋨Manual䋩
Gain 
AUTO
䋨Automatic gain control䋩, MANUAL䋨Manual䋩, OFF䋨0 dB䋩
Output signal 
or RGB : 0.7 V (p-p) standard   75
Y/P
B
/P
R
㱅  unbalanced, BNC connector 
HD-SDI (SMPTE 292M) : 0.8 V (p-p) standard   75
㱅 unbalanced, BNC connector 
Sync signal output 
SYNC :
75
㱅  unbalanced  BNC connector 
0.6 V
0.1 V
Interface 
Serial data interface
䋨RS-232C䋩
Optional parts 
IK-HD1H
䋨1/3 inch 3CCD camera head䋩
EXC
䋭HD03 (Approx. 3 m (118”) Camera cable)
EXC
䋭HD06 (Approx. 6 m (236”) Camera cable)
EXC
䋭HD10 (Approx. 10 m (394”) Camera cable)
EXC
䋭HD30 (Approx. 30 m (1181”) Camera cable)
Design and specifications are subject to change without notice. 
* These conditions are only satisfied when the camera control unit is connected to camera head model # IK-HD1H. 
External sync input 
HD SYNC  0.6 V (p-p) 75
㱅  unbalanced  BNC connector 
9. SPECIFICATIONS 
㫧
IK-HD1C_EN.indd   33
IK-HD1C_EN.indd   33
2007/05/11   10:42:03
2007/05/11   10:42:03