TP-LINK TL-WR740N Manuel D’Utilisation

 

- 52 - 

responds to the outgoing request. A response using one of these ports will be forwarded to 
the PC that triggered this rule. You can input at most 5 groups of ports (or port sections). 
Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 
3010-3030. 

¾

 

Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or 
ALL (all protocols supported by the Router). 

¾

 

Status - The status of this entry, either Enabled or Disabled. 

1. Click 

the Add New… button, the next screen will pop-up as shown in Figure 4-34. 

2.  Select a common application from the Common Applications drop-down list, then the 

Trigger Port field and the Incoming Ports field will be automatically filled. If the Common 
Applications  do not have the application you need, enter the Trigger Port and the 
Incoming Ports manually. 

3.  Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either 

TCP, UDP, or All. 

4.  Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, 

either TCP or UDP, or All. 

5. Select 

Enable in Status field.   

6. Click 

the 

Save button to save the new rule. 

 

Figure 4-34    Add or Modify a Port Triggering Entry 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button.