TP-LINK TL-WR740N Manuel D’Utilisation

Page de 109
TL-WR740N
Wireless Lite N Router 
 
- 65 - 
3. Click “Access Control  Schedule” in the left to enter the Schedule Settings page. 
Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start 
Time is 1800 and Stop Time is 2000.   
4. Click “Access Control  Rule” in the left to return to the Access Control Rule 
Management page. Select “Enable Internet Access Control” and choose "Deny the 
packets not specified by any access control policy to pass through the Router". 
5. Click 
Add New... button to add a new rule as follows:   
z
 
In  Rule Name field, create a name for the rule. Note that this name should be 
unique, for example Rule_1.   
z
 
In Host field, select Host_1.   
z
 
In Target field, select Target_1.   
z
 
In Schedule field, select Schedule_1.   
z
 
In Action field, select Allow.   
z
 
In Status field, select Enable.   
z
 
Click Save to complete the settings. 
Then you will go back to the Access Control Rule Management page and see the following list. 
 
4.11.2  Host 
Choose menu “Access Control  Host”, you can view and set a Host list in the screen as 
shown in Figure 4-48. The host list is necessary for the Access Control Rule. 
 
Figure 4-48  Host Settings 
¾
 
Host Description - Here displays the description of the host and this description is unique.   
¾
 
Information - Here displays the information about the host. It can be IP or MAC.   
¾
 
Modify - To modify or delete an existing entry.