TP-LINK TL-WR740N Manuel D’Utilisation

 

- 72 - 

¾

 

Subnet Mask  - The Subnet Mask determines which portion of an IP Address is the 

network portion, and which portion is the host portion. 

¾

 

Gateway - This is the IP Address of the gateway device that allows for contact between 

the Router and the network or host. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list. 

4. Click 

the 

Save button to make the entry take effect. 

Click the Delete button to delete the entry. 

Click the Enable All button to enable all the entries. 

Click the Disable All button to disable all the entries. 

Click the Delete All button to delete all the entries. 

Click the Previous button to view the information in the previous screen, click the Next button to 

view the information in the next screen. 

 

Figure 4-58 Bandwidth Control 

There are two submenus under the Bandwidth Control menu as shown in Figure 4-58. Click any 

of them, and you will be able to configure the corresponding function. The detailed explanations 

for each submenu are provided below. 

Choose menu “Bandwidth Control →  Control Settings”, you can configure the Egress 

Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less 

than 100000Kbps.