TP-LINK TL-WR740N Manuel D’Utilisation

Page de 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router 
 
-11- 
 
Figure 3-6    Choose WAN Connection Type 
The Router provides Auto-Detect function and supports three popular ways PPPoE
Dynamic IP and Static IP to connect to the Internet. It’s recommended that you make use of 
the Auto-Detect function. If you are sure of what kind of connection type your ISP provides, 
you can select the very type and click Next to go on configuring. 
4.  If you select Auto-Detect, the Router will automatically detect the connection type your ISP 
provides. Make sure the cable is securely plugged into the WAN port before detection. The 
appropriate configuration page will be displayed when an active Internet service is 
successfully detected by the Router. 
¾
 
If the connection type detected is PPPoE, the next screen will appear as shown in 
Figure 3-7. 
 
Figure 3-7    Quick Setup – PPPoE 
¾
 
User Name and Password - Enter the User Name and Password provided by your ISP. 
These fields are case sensitive. If you have difficulty with this process, please contact 
your ISP. 
¾
 
Confirm Password - Re-enter the password provided by your ISP to ensure the 
Password you entered is correct. If the Password is different from the Confirm Password, 
the screen will appear as shown below. Click OK, and re-enter the Password  and 
Confirm Password.