TP-LINK TL-WR740N Manuel D’Utilisation

 

-27- 

¾

  MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks 

is 1500 Bytes. It is not recommended that you change the default MTU Size unless required 

by your ISP. 

¾

 

Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal 

notation provided by your ISP. 

3.  If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you 

should enter the following parameters (Figure 4-7): 

 

Figure 4-7    WAN - PPPoE 

¾

 

User Name/Password - Enter the User Name and Password provided by your ISP. These 

fields are case-sensitive. 

¾

 

Confirm Password - Re-enter the Password provided by your ISP to ensure the Password 

you entered is correct. 

¾

 

Secondary Connection - It’s available only for PPPoE Connection. If your ISP provides an 

extra Connection type such as Dynamic/Static IP to connect to a local area network, then you 

can check the radio button of Dynamic/Static IP to activate this secondary connection. 

• 

Disabled  - The Secondary Connection is disabled by default, so there is PPPoE 
connection only. This is recommended. 

• 

Dynamic IP  -  You can check this radio button to use Dynamic IP as the secondary 
connection to connect to the local area network provided by ISP.