TP-LINK TL-WR740N Manuel D’Utilisation

 

-46- 

 

Figure 4-24    The DHCP menu 

There are three submenus under the DHCP menu (shown in 

Figure 4-24

): DHCP Settings, DHCP 

Clients List and Address Reservation. Click any of them, and you will be able to configure the 

corresponding function. 

Choose menu “DHCP→DHCP Settings”, and then you can configure the DHCP Server on the 

page (shown in 

Figure 4-25

).The Router is set up by default as a DHCP (Dynamic Host 

Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are 

connected to the Router on the LAN.   

 

Figure 4-25  DHCP Settings 

¾

 

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must 

have another DHCP server within your network or else you must configure the computer 

manually. 

¾

 

Start IP Address - Specify an IP address for the DHCP Server to start with when assigning 

IP addresses. 192.168.0.100 is the default start address. 

¾

 

End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP 

addresses. 192.168.0.199 is the default end address.