TP-LINK TL-WR740N Manuel D’Utilisation

 

-49- 

Click the Enable/ Disabled All button to make all entries enabled/disabled 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page and Click the Previous button to return to the 

previous page. 

 

 

 

Figure 4-44 The Forwarding menu 

There are four submenus under the Forwarding menu (shown in 

Figure 4-44

): Virtual Servers, 

Port Triggering,  DMZ and UPnP. Click any of them, and you will be able to configure the 

corresponding function. 

Choose menu “Forwarding→Virtual Servers”, and then you can view and add virtual servers in 

the next screen (shown in 

Figure 4-45

). Virtual servers can be used for setting up public services 

on your LAN. A virtual server is defined as a service port, and all requests from Internet to this 

service port will be redirected to the computer specified by the server IP. Any PC that was used 

for a virtual server must have a static or reserved IP address because its IP address may change 

when using the DHCP function.   

 

Figure 4-45   

Virtual Servers 

¾

 

Service Port - The numbers of External Service Ports. You can enter a service port or a 

range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End 

port).  

¾

 

Internal Port - The Internal Service Port number of the PC running the service application. 

You can leave it blank if the Internal Port is the same as the Service Port, or enter a 

specific port number when Service Port is a single one.