TP-LINK TL-WR740N Manuel D’Utilisation

 

-65- 

¾

  MAC Address - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format (e.g. 

00-11-22-33-44-AA).  

2. Click 

Next when finishing creating the host entry, and the next screen will appear as shown in 

Figure 4-62. 

 

Figure 4-62    Quick Setup – Create an Access Target Entry 

¾

  Target Description - In this field, create a description for the target. Note that this 

description should be unique (e.g. Target_1).   

¾

  Mode - Here are two options, IP Address and Domain Name. You can choose either of 

them from the drop-down list.   

If the IP Address is selected, you will see the following items: 

¾

  IP Address - Enter the IP address (or address range) of the target (targets) in 

dotted-decimal format (e.g. 192.168.0.23).   

¾

  Target Port - Specify the port or port range for the target. For some common service 

ports, you can make use of the Common Service Port item below.   

¾

  Protocol - Here are four options, All, TCP, UDP, and ICMP. Select one of them from the 

drop-down list for the target.   

¾

  Common Service Port - Here lists some common service ports. Select one from the 

drop-down list and the corresponding port number will be filled in the Target Port field 

automatically. For example, if you select "FTP", "21" will be filled in the Target Port 

automatically.  

If the Domain Name is selected, you will see the following items: