TP-LINK TL-SL2210WEB/TL-SL2218WEB Manuel D’Utilisation

39

Gigabit Uplink Web Smart Switch

¾

: Indicates the switch port state that may be binding, free port, secure port, 

unplugged or "--". The details are shown below: 

■

 The binding function is disabled, and the port can learn MAC address 

freely.
Binding:

■

 The port is in binding state, and its bound MAC address number is still 

less than the max number.
Secure Port: 

■

The port has already bound the max number of MAC address in 

dynamic binding mode, or it was set to secure port manually in "Port Parameter" 

page.
Unplugged:

■

  The  port  is  a  SFP  port  and  unplugged.  The  dynamic  binding 

function cannot be configured now.
--:

■

 The port is a trunk member and its binding function cannot be configured.

If the port is set to secure port manually in "Port Parameter " page, the dynamic 

 

■

binding cannot be configured here. If the port with dynamic binding enabled transfers 
into secure state automatically because the port has bound the specified number 
MAC address, the dynamic binding function of the port can be enabled or disabled 
again.
The combo box in "All Ports " entry is used to change the selections of corresponding 

 

■

combo boxes of all ports simultaneously.
A "Refresh" button is provided to look up the latest number of bound MAC address.

 

■

Note: 

If the switch port is a trunk member or an unplugged SFP port, the binding

function of the port cannot be configured here.

This page is shown below:

Bound MAC Address

Figure 6-33 

¾

: Indicates the entry index in dynamic binding MAC address table.

¾

: Indicates MAC addresses already bound to the switch ports.

¾

: Indicates the switch port number corresponding to the bound MAC address.

Web Management