Fujifilm FinePix S5 Pro Digital SLR Camera N079420A Manuel Du Propriétaire

149

Choose the rate (2 frames/s or 1 frame/s) at which 
pictures can be taken in continuous low-speed mode.

The frame advance rate may drop at slow shutter speeds 
and at [

 D-RANGE] setting other than [100% (STD)].

Select [ON] to delay shutter release until about 0.4 s after 
the shutter button is pressed, reducing camera shake in 
situations in which the least camera movement could 
result in blurred photographs (for example, microscope 
photography).

See p.101 for details.

Normally, select [ON] to playback images quickly in the 
LCD monitor (or [OFF] to playback images slowly). With 
any software application, If you encounter some 
difficulties with playback or printing of images with [ON] 
selected, select [OFF].

Use this setting to specify how to display images on the 
LCD after shooting in order to check the result.

[CONTINUOUS]

The results are always displayed after you shoot. Then 
images are automatically recorded.
Press the shutter button or MENU/OK to take another 
picture.

[4 SEC], [2 SEC]

The image appears for about 4 or 2 seconds and is 
then recorded.

[OFF]

The photographed image is automatically recorded 
without being displayed.

This option controls the control panel backlight (LCD 
illuminator).

[OFF]

Control panel illuminates only while power switch is 
rotated to 

 position.

[ON]

Backlight stays lit (note that this increases battery 
drain).

How to use the SET UP menu (

➝p.138)