Deutsche Telekom Tiptel 274 1082688 Manuel D’Utilisation

Settings 

46 

Charging information 

Cost per unit ................   Enter the price for each tariff unit. You can find the 

price from your network supplier or from the PABX 
configuration. This requires the network supplier 
and PABX to support the tariff pulse. 

Currency ......................   Enter the currency icon here. Three entry characters 

are available. 

Call-back code ................  Enter the call-back code of your network operator 

(for Deutsche Telekom network e.g. H*37#). “H” 
eans the signal key with hook flash. 

PABX 

Flash key (R)................   F (Flash) or H (Hook flash). For PABX the flash 

(short, approx. 95ms) is usually used to start 
functions. In contrast the hook flash (long, approx. 
240 ms) is used by Deutsche Telekom. 

Outgoing call  ..............   Enter your prefix for the public telephone network 

(e.g. 0) here. Your telephone will then automatically 
enter a pause after dialling an outside line to 
prevent incorrect dialling. 
If you select the automatic exchange connection 
before each external call number from the 
telephone book, call lists (calls while absent, calls 
received) and message center (SMS) the outside 
line number is dialled automatically. 

Internal call back code   Enter the call back code for your PABX (for tiptel 

PABX e.g. F*37#). “F” refers to the signal button 
with Flash, enabling your device can detect internal 
call numbers; the outside line number must be 
entered. 

CLIP correction  ...........   Some PABX systems add numbers before the 

received call number. This results in incorrect 
messages for the received call number. In order to 
recognise and delete the additional numbers you 
can enter them here. 

Function keys...................   Select the function that you want to use via a 

function key and then press the required function 
key. You can also select names from the telephone 
book directly on the function keys.