Tecnoware EVO DSP PLUS MM 1.2 FGCEVDP1202MM Fascicule

ON LINE MM

UPS EVO DSP PLUS MM 

1.2-2.4-3.6

Bypass Box for UPS MM from 1 KVA to 3.6 KVA 

FGCBYPIEC 

Dry Contact for Evo Dsp MM and Evo Dsp Plus MM 

FGCEVODSDRY3 

SNMP for Evo Dsp MM and Evo Dsp Plus MM 

FGCNETAG7

IEC320 C20/M connector to wire 

ESNIEC60320C20

 

© 2014 Tecnoware Power Systems. I dati tecnici possono essere variati senza preavviso.

5° C (41° F)
25° C (77° F)
30° C (88° F)
40° C (104° F)

It is necessary to
recharge the batteries
for a minimum
of 24 hours.

Attention: batteries
may not be recoverable
even when subjected
to charging.

The higher is the temperature of the environment in which the
UPS works, the shorter is the battery life.

Code 

Nominal power 

1.200 VA 

2.400 VA 

 

3.600 VA 

Active power 

840 W 

1.680 W 

 

2.520 W 

Power factor 

 0,7 

Technology 

 

On-Line Double Conversion transformerless (VFI-SS-111)

Cooling  

 Fan 

cooling

Audible noise 

 

< 45 dBA at 1 m

Dimension (UPS) WxHxD 

15x22x40 cm 

19x32x42 cm 

Dimension (with packing) WxHxD 

23x33x47 cm 

33x46x56 cm

Weight 

12 Kg 

18 Kg 

 

30 Kg

Equipped with

 

1 power cable 

 

2 output cables (IEC type) 

Input
Number of phases 

 

1Ph+N

Nominal voltage 

 

208Vac/220Vac/230Vac/240Vac

Input voltage range  

 

160Vac-300Vac from 50% to 100% load, 110Vac-300Vac up to 50% load

Nominal frequency 

 

50/60 Hz (selectable)

Input frequency range (On-Line mode) 

 

±7%

Input power factor 

 

0,99 

 

  

Output
Number of phases 

 

1Ph+N

Nominal voltage 

 

208Vac/220Vac/230Vac/240Vac

Static voltage Regulation at %100 

 

±2%

linear load (On-Line and battery mode) 

 

 

Voltage THD at rated linear load 

 

<3% (linear load), <6% (non-linear load)

Crest factor 

 3:1

Frequency 

 

50/60 Hz (selectable)

Free running frequency  

 

±0,2 Hz

Inverter waveform 

 

Sinewave 

 

Overload capability 

 

100-110% only audible warning, 110-130% for 30 sec, >130% for 100 ms 

 

Effi ciency  

   

>92% (line/battery mode), >98% (ECO mode)

Transfer time 

 

0 ms (On-Line)

Outlets 

4 (IEC 320 C13 type) 

   6 (IEC 320 C13 type) + 1 (IEC 320 C19 type) 

Number of phases 

 

1ph+N 

Nominal voltage 

 

208Vac/220Vac/230Vac/240Vac 

Voltage range 

 

Low threshold 170Vac-220Vac (selectable) - High threshold 230Vac-264Vac (selectable)

Eco Mode
Voltage range 

  Low threshold from -7 to -24Vac (selectable) - High threshold from +7 to +24 Vac (selectable) 

Input frequency range (50Hz nominal frequency) 

 

47-53 Hz

Input frequency range (60Hz nominal frequency) 

 

57-63 Hz  

Battery
Type 

Lead acid, sealed, maintenance free 

 

Batteries number  

2 (internal) 

4 (internal) 

 

6 (internal)

Battery charge time (typical) 

 

6-8 hours 

Nominal battery voltage 

24Vdc 

48Vdc 

 

72Vdc

Battery specifi cation 

 

12Vdc - 9Ah

Backup time (Typical) 

10 min

Interface (communication port) 

USB (card slot)

Dry contact interface 

Yes (optional 

replacing USB)

Software  

TecnoManager downloadable free from 

www.tecnoware.com (compatible with WINDOWS, UNIX, LINUX, ecc.)

SNMP interface 

SNMP internal module (compatible with WINDOWS, UNIX, LINUX, ecc.) - optional

Phone/modem line protection 

RJ11/RJ45 plug

Environmental specifi cation
Storage temperature  

From -15 to 40 °C (for Battery Box with battery inside, see “Storage of batteries in UPS and Battery Box” graphic) 

Working temperature 

From 0 to 40 °C (recommended from 20 to 25 °C, for a correct battery use see “Battery life in service” graphic)

Humidity 

< 95% without condensation

Maximum altitude 

3000 m

IP protection 

IP20 

Certifi cations 

CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classifi cation IEC EN 62040-3)

Standard 

24 months electronic parts and 12 months batteries

Extensions 

Optional

www.tecnoware.com