NAD C 546BEE C546BEE Fascicule

NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of 

NAD Electronics International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form  

whatsoever without the written permission of NAD Electronics International. © 05/12 11-064 NAD Electronics International.

GENERAL

Output Level                                                 Analogue

                                                                          Optical

                                                                         Coaxial

2.2 ±0.2V

0dB (ref 2.2V)

500 ±150mV

Frequency Response

5Hz - 20kHz ±0.5dB

Total Harmonic Distortion

0.0035%

Signal/Noise Ratio

118dB (ref. 1kHz, A-weighted LPF Stop, Pause)    

Channel Balance

±0.5dB (ref. 0dB 1kHz)

Dynamic Range

95dB

Channel Separation  

>110dB 

De-emphasis 

<0.5dB

Linearity 

±0.5dB 0 to -90dB

USB

Frequency Response 

±1dB (ref. 0dB 20Hz - 16kHz) 

Total Harmonic Distortion 

<0.03% (ref. 0dB 1kHz, Audio LPF)

POWER CONSUMPTION

Standby Power

<0.5W (120V/230V)

Idle Power

9W

DIMENSION AND WEIGHT

Unit Dimensions (WxHxD) - Gross*

435 x 89 x 307mm

17 1/8 x 3 9/16 x 12 1/16 inches**

Net Weight

4.9kg (10.8lb)

Shipping Weight

6.3kg (13.9lb)

*  Gross dimensions include feet, extended buttons and rear panel terminals.

** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers, 

cabinet makers, or other end users based on information contained in this document.

Note: Installers should allow a minimum clearance of 55mm for wire/cable management.

Total Depth 307mm

C 546BEE

Total Width 435mm

Total Height

89mm