Eaton 5130 1250VA 2U PW5130I1250-XL2U Manuel D’Utilisation
Codes de produits
PW5130I1250-XL2U
3
Maximum availability for critical systems
More battery runtime for important systems. If the power
goes out, you want to reserve available battery runtime for
the most essential loads. With the 5130’s load segmentation
feature, PowerShare, you can independently control output
receptacles. You can shut down power to less essential
loads to extend available runtime for more critical devices.
goes out, you want to reserve available battery runtime for
the most essential loads. With the 5130’s load segmentation
feature, PowerShare, you can independently control output
receptacles. You can shut down power to less essential
loads to extend available runtime for more critical devices.
PowerShare can also be used to remotely re-boot
locked-up network equipment or manage scheduled shutdowns and sequential startups of
connected equipment.
locked-up network equipment or manage scheduled shutdowns and sequential startups of
connected equipment.
Battery runtime for minutes or hours. During a power outage, internal batteries in the 5130 keep
loads running for up to 16 minutes (depending on load), long enough to gracefully shut down
systems. You can add more runtime with up to four external battery modules to run systems for
hours if necessary. Each external battery module occupies only 2U (3U for reduced depth, 3000
VA models)and provides more than an hour of runtime for a fully loaded UPS.
loads running for up to 16 minutes (depending on load), long enough to gracefully shut down
systems. You can add more runtime with up to four external battery modules to run systems for
hours if necessary. Each external battery module occupies only 2U (3U for reduced depth, 3000
VA models)and provides more than an hour of runtime for a fully loaded UPS.
Service without downtime. With hot-swappable batteries, one person can replace a battery
module without disrupting data centre operations or power to protected equipment. With an
optional, multi-mount hot-swap maintenance bypass module, you can even remove and replace
the entire UPS without powering down connected loads.
module without disrupting data centre operations or power to protected equipment. With an
optional, multi-mount hot-swap maintenance bypass module, you can even remove and replace
the entire UPS without powering down connected loads.
Visibility and control from anywhere
Local UPS status at a glance. LEDs on the front panel of the 5130 give you a quick read of UPS
status. Audible indicators alert you to abnormal conditions.
status. Audible indicators alert you to abnormal conditions.
Are internal batteries weak or low? Is there a site wiring fault? How much load is the UPS
supporting, relative to its capacity? Is it at risk of overload? You get up-to-the-minute answers
to these and more critical questions.
supporting, relative to its capacity? Is it at risk of overload? You get up-to-the-minute answers
to these and more critical questions.
Choice of communication options. You would expect UPSs in this class to have one slot for
a serial communications card, but the new 5130 has two built-in serial ports (one USB and
one RS-232) plus an extra slot for another communication card to support Web or SNMP.
Connectivity options are available to suit nearly any communication requirement.
a serial communications card, but the new 5130 has two built-in serial ports (one USB and
one RS-232) plus an extra slot for another communication card to support Web or SNMP.
Connectivity options are available to suit nearly any communication requirement.
Enhanced monitoring. With new card options, the UPS can communicate directly with network/
building management systems, environmental monitors, relay contact devices, multiple servers
and other UPSs—in a variety of networking environments, including the Web.
building management systems, environmental monitors, relay contact devices, multiple servers
and other UPSs—in a variety of networking environments, including the Web.
Control and visibility over
UPS status and operation
UPS status and operation
• LEDs and audible alarms
for up-to-the-minute status
• Multiple options for
industry-standard
communications
• LanSafe software included
free of charge
• Direct monitoring via
existing management
systems and LANs
Communication cards
Front panel LEDs
load segmentation
www.powerware.com.au 1300 UPS UPS
(1300 877 877)