Tuncmatik Lite II 650VA TSK5200 Manuel D’Utilisation

Press the smart button for minimum 1 second to turn the UPS unit on. If 

mains is cut off when UPS is working, UPS starts working in battery 

mode and gives audible alarm. If you press smart button once, UPS 

audible alarm stops (Alarm Silence Function).

If the smart button is pressed once again, the alarm starts again.

After UPS alarm is silenced, when 

battery capacity drops to a critical level 

the audible alarm starts automatically 

again and cannot be silenced. Press the 

smart button until the LED turn into red 

then remove your finger to shut down 

the UPS unit.

This unit is shipped from the factory with its internal battery 

fully charged, however, some charge may be lost during 

shipping and the battery should be recharged prior to use. 

Turn on the UPS, Plug the unit into an appropriate power 

supply and allow the UPS to charge fully by leaving it 

plugged in for at least 6 hours with no load (no electrical 

devices such as computers, monitors, etc.) connected. 

Green LED flashes while UPS charging.

Remove the UPS from its packaging and inspect it for 

damage that may have occurred during shipping. If any 

damage is discovered, repack the unit and return it to 

the place of purchase.

SMART BUTTON TECHNOLOGY

ALARM SILENCE FUNCTION