Lancom Systems L-1302acn 61732 Manuel D’Utilisation

2400 -2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions)

Frequency band 2.4 GHz and 5 GHz

Module 1: 1300 Mbps according to IEEE 802.11ac with MCS9 (Fallback to 6,5 Mbps with MCS0)

Data rates IEEE 802.11n

Module 2: 450 Mbps according to IEEE 802.11n with MCS23 (Fallback to 6,5 Mbps with MCS0)

Data rates IEEE 802.11n

Module 2: 54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5,
2, 1 Mbps, Automatic Rate Selection), IEEE 802.11 b/g compatibility mode or pure g or pure b

Data rates IEEE 802.11b/g

Module 1 a. 2: 54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output)
and DFS (automatic channel selection, radar detection) according to EN 301 893

Data rates IEEE 802.11a/ h

Module 1: IEEE 802.11a/h: +18 dBm @ 6 up to 48 MBit/s and +16 dBm @ 54 MBit/s IEEE 802.11ac: +16 up to +18 dBm @ MCS0-7 20/40/80 MHz,
+14 dBm @ MCS8 20/40/80 MHz, +14 dBm @ MCS9 40/80 MHz

Output power at radio module, 5 GHz

Module 2: IEEE 802.11a/h: +17 up to +18 dBm @ 6 up to 48 Mbps, +13 up to +15 dBm @ 54 Mbps IEEE 802.11n: +17 up to +18 dBm @ 6,5/13/19,5
Mbps (MCS0/8/16, 20 MHz), +11 up to +13 dBm @ 65/130/23 Mbps (MCS7/15/23, 20 MHz), +16 up to +17 dBm @ 15/30/45 Mbps (MCS0/8/16,
40 MHz), +9 up to +12 dBm @ 150/300/450 Mbps (MCS7/15/23, 40 MHz)

Output power at radio module, 5 GHz

Module 2: IEEE 802.11b: +22 dBm @ 1 and 2 Mbps, +22 dBm @ 5,5 and 11 Mbps IEEE 802.11g: +22 dBm @ 6 up to 36 Mbps, +20 dBm @ 48
Mbps, +18 dBm @ 54 Mbps IEEE 802.11n: +22 dBm @ 6,5/13/19,5 Mbps (MCS0/8/16, 20 MHz), +16 dBm @ 65/130/195 Mbps (MCS7/15/23, 20
MHz), +21 dBm @ 15/30/45 Mbps (MCS0/8/16, 40 MHz), +15 dBm @ 150/300/450 Mbps (MCS7/15/23, 40 MHz)

Output power at radio module, 2.4 GHz

IEEE 802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)

Max. radiated power (EIRP), 2.4 GHz band

IEEE 802.11a/h: Up to 30 dBm / 1000 mW EIRP (depending on national regulations on channel usage and subject to further obligations such as
TPC and DFS)

Max. radiated power (EIRP), 5 GHz band

Transmission power reduction in software in 1 dB steps to min. 0.5 dBm

Minimum transmission power

Module 1: IEEE 802.11a/h: -95 dBm @ 6 MBit/s, -76 dBm @ 54MBit/s, IEEE 802.11ac: -94 dBm @ MCS0 20 MHz, -76 dBm @ MCS7 20 MHz, -72
dBm @ MCS8 20 MHz, -92 dBm @ MCS0 40 MHz, -76 dBm @ MCS7 40 MHz, -71 dBm @ MCS8 40 MHz, -70 dBm @ MCS9 40 MHz, -90 dBm @
MCS0 80 MHz, -72 dBm @ MCS7 80 MHz, -68 dBm @ MCS8 80 MHz, -67 dBm @ MCS9 80 MHz

Receiver sensitivity 5 GHz

Module 2: IEEE 802.11a/h: -93 dBm @ 6 Mbps, -79 up to -80 dBm @ 54 Mbps, IEEE 802.11n: -93 dBm @ 6,5 Mbps (MCS0, 20 MHz), -77 dBm @65
Mbps (MCS7, 20 MHz), -89 up to -90 dBm @ 15 Mbps (MCS0, 40 MHz), -69 up to -74 dBm @ 150 Mbps (MCS7, 40 MHz)

Receiver sensitivity 5 GHz

Module 2: IEEE 802.11b: -90 up to -91 dBm @ 11 Mbps, -101 dBm @ 1 Mbps, IEEE 802.11g: -94dBm @ 6 Mbps, -80 up to 81dBm @ 54 Mbps,
IEEE 802.11n: -94 dBm @ 6,5 Mbps (MCS0, 20 MHz), -77 to -78 dBm @ 65 Mbps (MCS7, 20 MHz), -91 dBm @ 15 Mbps (MCS0, 40 MHz), -75 to
-76 dBm @ 150 Mbps (MCS7, 40 MHz)

Receiver sensitivity 2.4 GHz

Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)

Radio channels 2.4 GHz

Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection depending on
national regulations)

Radio channels 5 GHz

Seamless handover between radio cells, IAPP support with optional restriction to an ARF context, IEEE 802.11d support

Roaming

Opportunistic key caching allows fast roaming processes between access points. WLAN installations utilizing a WLAN controller and IEEE 802.1X
authentication cache the access keys of the clients and are transmitted by the WLAN controller to all mananged access points

Opportunistic Key Caching***

Pre-authentication, PMK caching, and opportunistic key caching for fast roaming

WPA2 fast roaming

Up to 255 clients (recommended), 512 clients (max.)***

Concurrent WLAN clients

With background scanning, moving LANCOM 'client mode' access points pre-authenticate to alternative access points which offer a better signal
before Roaming fails

Fast client roaming

VLAN ID definable per interface, WLAN SSID, point-to-point connection and routing context (4094 IDs) IEEE 802.1q

VLAN

Dynamic VLAN assignment for target user groups based on MAC addresses, BSSID or SSID by means of external RADIUS server.

Dynamic VLAN assignment

Support of layered IEEE 802.1q VLANs (double tagging)

Q-in-Q tagging

Simultaneous use of up to 8 independent WLAN networks per WLAN interface

Multi-SSID

Support for Internet Group Management Protocol (IGMP) in the WLAN bridge for WLAN SSIDs and LAN interfaces for specific switching of multicast
packets (devices with integrated WLAN only). Automated detection of multicast groups. Configurable action for multicast packets without registration.
Configuration of static multicast group members per VLAN ID. Configuration of query simulation for multicast membership per VLAN ID

IGMP snooping

IEEE 802.11i / WPA2 with passphrase (WPA2-Personal) or IEEE 802.1X (WPA2-Enterprise) and hardware-accelerated AES, closed network, WEP64,
WEP128, WEP152, user authentication, IEEE 802.1x /EAP, LEPS, WPA1/TKIP

Security

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FAST

EAP Types

Integrated RADIUS server for MAC address list management

RADIUS server

Integrated EAP server for authentication of IEEE 802.1X clients via EAP-TLS, EAP-TTLS, PEAP, MSCHAP or MSCHAPv2

EAP server

LANCOM L-1302acn dual Wireless

Features as of: LCOS 9.00