Fujifilm XQ1 12885 Manuel D’Utilisation
Codes de produits
12885
96
Menus
Using the Menus: Shooting Mode
D
D WHITE BALANCE (Continued)
WHITE BALANCE (Continued)
((default:
default: AUTO)
AUTO)
h
h
: Custom White Balance
: Custom White Balance
Choose
h to adjust white balance for unusual lighting conditions. White balance measure-
ment options will be displayed; frame a white object so that it fi lls the display and press the
shutter button all the way down to measure white balance (to select the most recent custom
value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select
the most recent value and display the fi ne-tuning dialog).
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (P 44) and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
shutter button all the way down to measure white balance (to select the most recent custom
value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select
the most recent value and display the fi ne-tuning dialog).
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (P 44) and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
R For greater precision, adjust P FILM SIMULATION, N ISO, and U DYNAMIC RANGE
before measuring white balance.
R At settings other than
h
, auto white balance is used with the fl ash.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the display.