Fujifilm FinePix Z10FD Blue FXZ10FD/BLUE Manuel D’Utilisation

117

• FinePix Z10fd is compatible with PTP (Picture Transfer 

Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-
compatible camera is a camera that can recognize the 
PC and printer automatically when connected.

• Do not disconnect the USB cable (included) when the 

camera is communicating with a PC. If the USB cable 
(included) is disconnected during communication, the 
files on the Memory Card or internal memory may be 
damaged.

• In Mac OS X, you must set automatic setup the first time 

you connect the camera to your PC.

• When the camera and PC are exchanging data, the 

indicator lamp blinks alternately green and orange.

• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect 

the camera from the PC.

• The camera and PC may be exchanging data even 

when “Copying” disappears from your PC screen. 
Before disconnecting the USB cable (included), always 
check that the indicator lamp is off.

• Always use FinePixViewer to transfer images with voice 

memos to a PC.

• The cost of an Internet provider for connecting to the 

internet is the user’s responsibility.

• When using FinePixViewer to save images on a data 

server (network), FinePixViewer may not run as it would 
in a standalone PC environment.

• Always use the FUJIFILM AC Power Adapter AC-5VX 

(sold separately) and DC coupler CP-45 (sold 
separately). If the camera suddenly loses power during 
data exchange, data exchange will not be performed 
correctly, and the Memory Card or internal memory 
could be damaged.

• Make sure that the USB cable (included) is connected 

correctly and securely.

• Connect the camera directly to the PC using the USB 

cable (included). The software may not operate 
correctly when you use an extension cable, or if you 
connect the camera via a USB hub.

• When your PC has more than one USB port, the 

camera can be connected to either port.

• When Windows 98 SE is used, the supplied software 

must be installed first before connecting the camera to 
a PC using the USB cable. The PC will not recognize 
the camera if it is connected before installation.

• A memory Card, the internal memory, data in a Memory 

Card or data in the internal memory could be damaged 
if any of the following are performed;
- the USB cable is disconnected
- power switch or buttons are pressed, or the lens cover 

is interfered with

Continued Q