Mediola 2 channel wireless/door/window contact FS20 TFK2 652-77 Fiche De Données

A channel’s address comprises a two-digit address group and a two-digit subaddress.

The address group ‘11’ is factory set for all channels.

If several transmitters are to be operated at the same time and control different receivers, then
different addresses need to be set on the transmitters.

• To set an address group and subaddress,

press the respective button combination si-
multaneously for around 5 seconds until the
indicator LED begins to blink slowly (around
once a second).

-  for channel 1 (CH1), buttons 1 and 2

-  for channel 2 (CH2), buttons 3 and 4

• Now enter a two-digit address group and a

two-digit subaddress using the 1, 2, 3 and 4
buttons.

Example:

1431 (address group 14, subaddress 31)

• The programming mode ends automatically

once you have entered the fourth digit. This is
indicated by the status LED going out.

The following address combinations are fac-
tory set to the button combinations:

Button combination 1 (buttons 1 + 2):
address 11 11
Button combination 2 (buttons 3 + 4):
address 11 12



The address group 44 and the subaddress 44 both have a particular meaning
(see the following section)!