Mediola 2 channel wireless/door/window contact FS20 TFK2 652-77 Fiche De Données

In addition to the factory settings (see section 7. b), various individual settings may be
programmed to suit your needs.

The ‘FS20 TFK’ can control two different channels of the FS20 system.

These may be set separately (except for the house code, see section 9).



In the following instructions, the buttons in brackets apply to channel 2.

The on-time of the FS20 receiver controlled components is programmable from 0.25 seconds
to 4.25 hours; a continuous setting is also available.

• Press button 1 (or for channel 2, button 3) for

around 5 seconds, until the indicator LED be-
gins to blink.

• Enter the desired on-time using four digits with

buttons 1, 2, 3 and 4, using the table below.

• When the fourth digit is entered, the indicator

LED goes out.

The first two digits provide the numerical value
and the following two digits a multiplier with the
appropriate time unit.

For example (factory setting): 1 minute

Enter 44 21 = 15 x 4 seconds = 60 seconds