Philips PSC705 Geluidskaart Seismic Edge PCI PHIPSC705K Manuel D’Utilisation

 

 

Reverb, QXpander (when enabled), and expansion of stereo to 4 or 5.1 channels (QMSS) are automatically 
applied to all sounds generated by applications running on your PC however they are not applied to inputs such 
as analog “CD In” and “Line In” unless that input is selected on the “Apply Reverb/QMSS/QXpander to External 
Input Source “ selector pull-down menu. 

 

For example if you are using the Microsoft “CD player” which uses the analog “CD In” connector to play CD’s or 
if you are using a tape deck or other external device connected to “Line In” you must select the input here to 
enable conversion these stereo sources to 4 or 5.1 channels using QMSS.  However if you are using an 
application that is not dependent on these connections such as a game, MP3 player, or a CD player that uses 
digital extraction rather than analog “CD In” (such as the included Siren JukeBox application) then QMSS is 
used to automatically convert these sources to 4 or 5.1 channels (when in 4 or 5.1 speaker mode). 
 
These controls allow you to manage the application of reverb and QSound Environmental Modeling™ 
(QEM™).  QEM provides EAX 1.0/2.0 game compatibility and the ability to apply reverb to non-EAX sources 
including applications, and external inputs. 

 

 

When playing games supporting EAX properties select the “Enable” box under “Reverb/QSound Environmental 
Modeling”.  Set the Environment selector to “- none –“ to avoid reverb being applied to non-EAX applications. 

To apply reverb to non-EAX applications also select a reverb type using the “Environment” selector described 
below and adjust the reverb level using slider corresponding to the source.