Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 Fiche De Données
Codes de produits
RED Pitaya V 1.1
10
Make sure the Micro SD card’s capacity does not exceed 32 GB, it is empty and formatted
as a FAT32 file system.
Extract the downloaded Red Pitaya SD card image zip file and copy its content to the Micro
SD card.
Figure 4: OS installation to Micro SD card.
Final directory structure in the Micro SD card should look like:
/bin
/etc
/sbin
/src
/www
boot.bin
devicetree.dtb
uImage
uramdisk.image.gz
version.txt
Unmount and remove the Micro SD card from your PC and insert it into Red Pitaya.
3.4 Manual network interface configuration
To set-up a custom network configuration, unplug the Micro SD card from Red Pitaya and plug it
into your computer or tablet. Use a text editor and edit the /etc/network/interfaces file. Follow
instructions given in the file.
To set a static configuration:
into your computer or tablet. Use a text editor and edit the /etc/network/interfaces file. Follow
instructions given in the file.
To set a static configuration:
Comment (with #) the
iface eth0 inet dhcp
line.
Uncomment the lines below including
iface eth0 inet static
. Set up the network
configuration matching your network.
To set a dynamic (DHCP) configuration: