Fujifilm FinePix Z10FD Blue 04000499 Manuel D’Utilisation

Codes de produits
04000499
Page de 166
66
[SHOOTING MENU]
Area shot and quality setting
Normal shooting provides an aspect ratio of 4:3 and % 
shooting provides an aspect ratio of 3:2 (same aspect ratio as 
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the 
image quality becomes. As the number of recorded 
pixels becomes smaller, you will be able to record more 
frames to an Memory Card.
• The quality setting is retained even when the camera is 
turned off or the mode setting is changed.
• When changing the quality setting, the number of 
available frames also changes (
➝p.144). The numbers 
to the right of setting show the number of available 
frames.
Changing the sensitivity setting 
([
 ISO])
Use this menu to specify required sensitivity setting of the 
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is 
obtained. The higher sensitivity settings will allow you to 
take pictures in darker locations.
CHECK
Settings
[AUTO]/1600/800/400/200/100/64
Selecting [AUTO] as the sensitivity setting, the camera 
selects the best sensitivity setting for the subject’s 
brightness.
AUTO
AUTO
Area shot excluding %
AUTO
AUTO
Area shot with %
The selected sensitivity 
setting appears on the 
LCD monitor when the 
sensitivity setting is set to 
another setting excluding 
[AUTO].
M
N
N 10
10
ISO 100
ISO 100
Setting the menu (
➝p.58)