Fujifilm FinePix Z100fd, Pink 04001264 Manuel D’Utilisation

126

Connecting to a PC

When your PC recognizes the camera automatically, 
FinePixViewer automatically starts up and the Save 
Image Wizard window (Save Image dialog box) appears. 
Follow the instructions provided on screen to save the 
images. To proceed without saving the images, click the 
[Cancel] button.

• When there are many images stored on a Memory 

Card, it takes a while to display on the screen of your 
PC. Also, it may take a while to import images or you 
may be unable to save images. In this case, use an 
Image Memory Card Reader.

• Folder titles are created with the language selected on 

the camera. When the set language of your PC and 
camera differ, folder titles may not be displayed 
correctly.

• Images in the internal memory cannot be saved on your 

PC if a memory card is inserted in the camera. Before 
connecting the camera to your PC, remove the memory 
card from the camera to save images in the internal 
memory to your PC.

• You can only see images saved on a PC. Save images 

on a PC.

• If you cancel saving by clicking the [Cancel] button, 

close the lens cover to turn off the camera and then 
disconnect it from the PC.

• When the camera is connected to your PC, 

FinePixViewer automatically starts up by the function of 
Exif Launcher, which is installed in FinePixViewer.

If FinePixViewer does not start up automatically, the 
software may not be installed correctly. Set your PC again 
after disconnecting the camera and restart.

• Close all files in the camera, and make sure the camera 

is not exchanging data.

• The camera and PC may be exchanging data even 

when “Copying” disappears from your PC screen, 
especially in the case of copying large data amounts. 
Do not disconnect the USB cable (included), 
immediately after this message has disappeared. 
Always check that the indicator lamp is off first before 
disconnecting.

Proceed to “Using FinePixViewer” (

➝p.127).