Chauvin Arnoux C.A 740N Voltage Tester P01191741Z Fiche De Données

Codes de produits
P01191741Z
Page de 84
31
4. MAINTENANCE
  Except for the batteries, the instrument contains 
no parts that can be replaced by personnel who have not 
been specially trained and accredited. Any unauthorized 
repair or replacement of a part by an “equivalent” may 
gravely impair safety.
4.1. CLEANING
Disconnect the instrument completely.
Use a soft cloth, dampened with soapy water. Rinse with a 
damp cloth and dry rapidly with a dry cloth or forced air. Do 
not use alcohol, solvents, or hydrocarbons.
4.2. REPLACEMENT OF BATTERIES
If, during the self-test, only half of the indicators light, you 
must replace the batteries. 
 
„ Disconnect anything connected to the device.
 
„ Using a screwdriver, unscrew the two captive screws of 
the battery compartment cover located on the back of 
the device.
 
„ Withdraw the spent batteries and replace them with two 
new batteries (AAA or LR3 1.5V alkaline batteries).
 
„ Close the battery compartment cover and make sure that 
it is completely and correctly closed.
 
„ Screw the two screws back in.
Spent batteries must not be treated as ordinary 
household waste. Take them to the appropriate 
recycling collection point.
4.3. METROLOGICAL CHECk
  Like all measuring or testing devices, the instrument 
must be checked regularly.
This instrument should be checked at least once a year. 
For checking and calibration, contact one of our accredited 
metrology laboratories (information and contact details 
available on request), at our Chauvin Arnoux subsidiary or 
the branch in your country. 
4.4. REPAIR
For all repairs before or after expiry of warranty, please return 
the device to your distributor.