Native Instruments Traktor Kontrol S4 MK2 22400 Fiche De Données

6.4.1

Mixer Overview

 

The Mixer is equipped with four channels, each of them controlling the signal coming from one
particular Deck: channel A, B, C, and D control the signals coming from Deck A, B, C, and D,
respectively.
Thanks  to  the  logical  layout  of  the  channels  on  the  Mixer,  you  can  quickly  see  what  goes
where:

▪

Channels on the left (A and C) control the signals from left Decks in the software.

▪

Channels on the right (B and D) control the signals from right Decks in the software.

▪

Channels in the middle (A and B) control the signals from the upper Decks in the soft-
ware.

▪

Channels on the sides (C and D) control the signals from the lower Decks in the software.

6.4.2

The Main Section

 

The Mixer's Main section.

The Main section allows you to both monitor and adjust the overall output level of your mix,
i.e. the level being output from the device. In this section, The LED meters show the actual
level being output. So, when the 

MAIN LEVEL

 knob is turned down, the 

MAIN LEVEL

 meters

will go down too.

The 

MAIN LEVEL

 meters do not mirror what is seen in TRAKTOR PRO, although though the

clip LEDs will still light on the S4MK2 when TRAKTOR clips.

The Mixer

 

Traktor Kontrol S4 - Manual - 132