Native Instruments Traktor Kontrol S4 MK2 22400 Fiche De Données

3.

Click 

Close

 at the bottom of the window to confirm your modifications.

→ Your external audio source is now sent to Deck D, which acts as Live Input and forwards

the signal to channel D on the Mixer.

7.4.3

Using Four FX Units

 

TRAKTOR KONTROL S4 provides you with a total of four FX Units. By default, the first two FX

Units are activated. You can activate the other two FX Units in the 

Effects

 page of the Prefer-

ences via the FX Unit Selector in the 

FX Unit Routing

 section:

The FX Unit Selector in the FX Unit Routing section.

►

To activate all four FX Units, click 

4 FX Units

 in the FX Unit Selector.

With  the  four  FX  Units  1-4  activated,  channels  are  differently  routed  to  the  FX  Units.  Each
channel and its dedicated Deck have their own FX Unit: FX Unit 1, 2, 3, and 4 are assigned to
channel (and Deck) A, B, C, and D, respectively. This routing cannot be changed, only activat-
ed/deactivated.

When the four FX Units 1-4 are activated in TRAKTOR, the FX Units on your S4 follow the Deck
focus of the Decks underneath:

▪

Depending  on  whether  the  left  Deck  focus  is  on  Deck  A  or  C,  FX  Unit  1  on  your  S4  is
assigned to FX Unit 1 or 3 in TRAKTOR, respectively.

▪

Depending on whether the right Deck focus is on Deck B or D, FX Unit 2 on your S4 is
assigned to the FX Unit 2 or 4 in TRAKTOR, respectively.

This way, each FX Unit on your S4 always controls the software FX Unit needed for the Deck in
focus below.

Other Settings of Interest

 

Traktor Kontrol S4 - Manual - 173