Sony BDV-N5200W BDVN5200WB Fiche De Données

45

GB

BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W

4-485-800-13(1)

D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200 
(PMRF 02)\4485800131_GB (CEK)\080OTH.fm

masterpage:

Right

Each time you press DISPLAY, the display in 
the top panel display changes cyclically as 
follows:
Frequency t Preset number t Decoding 
status*
* Appears when [Sound Effect] is set to 

[Dolby Pro Logic], [DTS Neo:6 Cinema], or 
[DTS Neo:6 Music] (page 59).

Receiving Radio Data 
System (RDS)

The system offers RDS feature which 
enables you to view additional 
information from radio stations. 

Simply select a station from the FM 
band.
The station name appears on the TV 
screen.

• RDS may not work properly if the station 

you are tuned to is not transmitting the 
RDS signal properly, or if the signal 
strength is weak.

• Not all FM stations provide RDS service, 

nor do they provide the same type of 
services. If you are not familiar with the 
RDS system, check with your local radio 
stations for details on RDS services in your 
area.

Using the Control for 
HDMI Function for 
“BRAVIA” Sync

This function is available on TVs with the 
“BRAVIA” Sync function.
By connecting Sony equipment that is 
compatible with the Control for HDMI 
function via an HDMI cable, operation is 
simplified.

To use the “BRAVIA” Sync function, be sure 
to turn on the system and all connected 
equipment after completed the HDMI 
connection.

You can set the system’s [Control for 
HDMI] function automatically by 
enabling the corresponding setting on 
the TV.
For details about the Control for HDMI 
function, see “[HDMI Settings]” 
(page 60).

You can turn the system off in sync with 
the TV.

The system does not turn off automatically 
while playing music or when “FM” function 
is selected.

When you press N on the remote 
control, the system and TV turn on, and 
the TV’s input is switched to the HDMI 
input which the system is connected.

Other Operations