Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Fiche De Données

● Select the function name 

and return to the Model 

menu by touching the 

R T N   b u t t o n . 　 O r   t h e 

H O M E / E X I T   b u t t o n   i s 

pushed.

[Corresponding model type]: Glider, Normal: 2 ailerons or more

Flying: 2 ailerons + 1 flap or more

This function is utilized to quickly slow the 

aircraft and reduce altitude by simultaneously 

raising the left and right ailerons and lowering the 

flaps (camber flap, brake flap).

 Butterfly (Crow) produces an extremely 

efficient landing configuration by accomplishing 

the following: 

1.  Slow the aircraft’s velocity. 
2.  Provide washout at the wing tips to reduce 

the tendency to tip stall.

3.  Create more lift toward the center of the 

wing allowing it to fly at a slower speed

● Mixing during flight can be turned ON/OFF by 

setting a switch. (Always ON at [--] setting)

●  The  point  at  which  the  butterfly  operation 

reference point can be offset. 

● The operational speed of the ailerons and flaps 

can be adjusted.

● The differential rate can be adjusted.

*For a description of the setting method, see the aileron 

differential function.

●Butterfly operation reference point

● Select [BUTTERFLY] at the Model menu 

and access the setup screen shown 

below by touching the RTN button.

*The display screen is an example. The actual 

screen depends on the model type.

Scrolling

● Moving cursor

● Selecting mode

● Adjusting value

● To next page

(Currently selected condition name)

● Servo speed setting

●Elevator adjustment

●Aileron/flap rate 

adjustment