Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Fiche De Données
Codes de produits
1-F8075
21
<Before Use>
Connector/Plug
Connector for trainer function
When you use the trainer function, connect the
optional trainer cable between the transmitters for
teacher and student.
*You can set the trainer function on the Trainer Function
screen in the System menu.
S.BUS connector (S.I/F)
When setting an S.BUS servo and telemetry
sensor, connect them both here.
(Supply power by 3-way hub or Y-harnesses.)
Earphone plug
It is not used now. (The function after upgrade)
Warning
Do not connect any other chargers except the
special charger to this charging connector.
*If you take out the NiMH battery HT5F1800B from the
transmitter, you can use the optional quick charger CR-
2000 corresponding to NiMH battery.
Trainer
Connector
S.BUS (S.I/F)
Connector
Earphone
Plug
Connector for battery charger
This is the connector for charging the NiMH
battery HT5F1800B that is installed in the
transmitter. Do not use any other chargers except
the attached special charger corresponding to
NiMH battery.
Charge
Plug