Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Fiche De Données

• Timer is displayed here.
  Touch the RTN button at the [xx]:[xx.

xx] item to start/stop the timer. 

•  Use the cursor to highlight this, then

touch the RTN button at the ST1 or ST2 

item to call the timer set-up screen. 

*See the description at the back of this manual.

•  Trim position is displayed here.
•  You can select the display unit

on the home screen on the 

T1-T4 setting screen within the 

linkage menu.

• The model name that

is currently used is 

displayed here. 

•  Use  the  cursor  to

highlight this, then 

touch the RTN button 

to call the model 

select set-up screen.

• This shows the accumulated time since

the latest reset. (Hour):(Minute)

• Use the cursor to highlight this, then

touch the RTN button for one second 

to reset the system timer.

Use the touch sensor to select the following display area to call each setting screen, and touch the RTN 

button. The setting screen appears.

•  When  the  battery  voltage

reaches 5.2V(Change in 

Warning Menu), the alarm 

will beep. Land your aircraft 

immediately.

•  System(FASSTest14CH  etc.)

mode is displayed here.

• Use the cursor to highlight this,

then touch the RTN button 

to call the frequency set-up 

screen.

• Touch the RTN button at

the clock icon to call the 

2

nd

 home screen (large 

size timer). 

• This shows the accumulated time

since the latest reset. (each model)

   (Hour):(Minute)
•  Use  the  cursor  to  highlight  this,

then touch the RTN button for one 

second to reset the model timer.

•  Touch  the  S1  button  or  push  the

HOME/EXIT button for one second to 

lock/unlock the key operation.

  In the key lock mode the key icon is 

displayed here.

• In the normal condition, move the

cursor to the condition name and 

touch the RTN button. The condition 

name is changed and blinks.

  It is possible to operate the digital 

trim in all conditions.

• When VPP function is assigned to a

channel, the current VPP condition

# is displayed here.