Smartwares 10.011.89 Wireless Surveillance System 10.011.89 Fiche De Données

36

WDVR cannot record

‧

Record schedule does not setup properly

→ Set proper schedule to each camera to enable recording

‧

Storage media not ready

→ Use recommeded storage media brand/model/spec, check 
     appendix
→ Install/uninstall storage media AFTER WDVR is powered off.
→ Use WDVR to format storage media then try again.
→ Only install one HDD or Flash disk to WDVR.

Miscellaneous TV 
display problems

‧

Camera color distoration

→ Adjust TV contrast/brightness/saturation/sharpness
→ Avoid direct sunlight into camera lens 

‧

Low or no camera audio/alarm sound

→ Adjust TV audio volume
→ From [Recorder Setup] - [Detection Setup], turn on alarm sound 

‧

No TV display

→ Check HD interface cable connection, use the HD interface cable 
     

provided with the package.

→ Change a HD cable and try again, 1.5M or shorter is suggested
     Compatible issue may happen.
→ Power save function is enableed. From [System Setup], set power 
     save function always ON.

WDVR Cannot remote 
view

‧

WDVR is not connected to internet properly

→ Make sure router DHCP and UPnP is enabled.
→ Make usre the Ethernet cable connection to router is solid.
→ Connect WDVR directly after the router, do not connect WDVR to 
     router through a hub or switcher.
→ Exit WDVR menu then try again.
→ Make sure the bandwidth is sufficient enough. Each remote 
     connection requires 1.5Mbps.
→ Make sure Android pad/smart phone is 1.5G/dual core processor; 
     iPhone4S/New iPad or above
→ General routers require 30 seconds to initiate WDVR netwrok 
     connection.
→ Maximium mumber of remote viewer is 3, the 4th connection may 
     be rejected.