Yaesu FT-857D Mode D’Emploi

 (T

.)

Connection of a tape recorder or other such receiver accessory is
easily accomplished by using the DATA jack’s Data Out (1200 bps)
terminal (Pin 5) and Ground (Pin 2). The audio output is fixed at
100 mV, with an impedance of 600 

W.

The two front feet of the transceiver allow the transceiver to be tilted upward for better
viewing. Simply fold both feet forward to raise the front of the transceiver, and fold them
back against the bottom case to lower the front of the FT-857.

DATA OUT
1200bps

GND