Bang & Olufsen BeoVision 9 Manuel D’Utilisation

The pincode system

NOTE! If you are prompted for a pincode the

first time you switch on your TV, contact your

Bang & Olufsen retailer. To cancel a pincode
entry and clear the input fields, press BACK. On
Beo4, press STOP.

*On Beo4 hold to bring up the five fields.

*Change of pincode

Incorrect pincode

If you change your pincode more than five times within a three-hour
period, the ‘PINCODE’ menu becomes inaccessible for three hours,
assuming that the TV is not disconnected from the mains.
Five incorrect entries will cause the TV to shut down for three hours,
during which operation is not possible. Disconnecting the TV resets the
three-hour period.

The pincode system prevents people who do not know the pincode from using

the TV. When the pincode system is activated and the TV has been

disconnected from the mains for 15–30 minutes, the system goes into effect.

Activate the pincode system

Enter a four digit pincode to activate the system.

Re-enter the code

and accept

Bring up ‘TV SETUP’

Delete the pincode

Delete the pincode you have chosen.

Select ‘DELETE

PINCODE’ and accept

Bring up ‘TV SETUP’

Enter a four digit

code and accept

Enter pincode and

Change the pincode

Change the pincode you have chosen.*

Enter new code,

accept, re-enter code

and accept

Bring up ‘TV SETUP’

Enter the pincode

If you cannot switch on the TV after
disconnection from the mains, wait 30 seconds
and try again.

Enter pincode

Enter pincode,

accept and select

‘NEW PINCODE‘

Press

twice

Press

twice

Press

twice

Press

If you forget the pincode

Contact your Bang & Olufsen retailer to receive
a five digit mastercode.

Accept to delete pincode, you can now

activate pincode system again

Enter five digit

mastercode

Hold when prompted

for pincode to display

five fields*

STOP