Intel IQ80321 Manuel D’Utilisation
Board Manual
27
Intel
®
IQ80321 I/O Processor Evaluation Platform
Getting Started
To bring up a HyperTerminal session on a Win32 platform: Go to Start, Programs, Accessories,
Communications, HyperTerminal
Communications, HyperTerminal
•
HyperTerminal setup screens:
— “Connection Description” Panel:
•
Enter name.
— “Connect To” Panel:
•
Select host com2 port (or whichever port you are using).
— Port Settings:
•
Bits per second: 115200
•
Data Bits: 8
•
Parity: none
•
Stop Bits: 1
•
Flow Control: none
— Start HyperTerminal:
•
Select Call from HyperTerminal panel.
— Reset or power up IQ80321 board.
— The Host screen reads:
For further information on the GDB/Insight Debugger, refer to the content of the GNUPro CD and/or
the GNUPro Debugging Tools manual. This setup assumes that Redboot is Flashed on the board.
the GNUPro Debugging Tools manual. This setup assumes that Redboot is Flashed on the board.
RedBoot(tm) debug environment - built dd:mm:yy, Mon dd 2001
Platform: IQ80321
Copyright (C) 2000, Red Hat, Inc.
RAM: 0xa0000000-0xa2000000
FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.
IP: 192.168.0.1, Default server: 0.0.0.0
RedBoot>