Whirlpool WET3300XQ Guide D’Installation Rapide

Turn on water faucets to check for leaks. A small amount of 

water may enter washer. It will drain later.

Secure drain hose to laundry tub leg, drain standpipe, or inlet 

hoses for wall standpipe with shipping strap removed earlier.

Laundry Tub

Standpipe

Wall

Using a 4" (102 mm) clamp, connect vent to exhaust outlet  

in dryer. If connecting to existing vent, make sure vent is 

clean. Dryer vent must fit over dryer exhaust outlet and inside 

exhaust hood. Check that vent is secured to exhaust hood 

with a 4" (102 mm) clamp.

Move washer/dryer to final location, taking care not to crush  

or kink vent.

After washer/dryer is in place, remove corner posts and 

cardboard from under washer/dryer.

Connecting from front

(for closet or recessed 

area)

Connecting 

from rear