Bunn VPS (with lighted switches) Manuel Du Propriétaire

Page 5

1.  The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all 

surfaces on Bunn-O-Matic equipment.

2.  Check and clean the sprayhead.  The sprayhead holes must always remain open.

3.  With the sprayhead removed, insert the deliming spring (provided) all the way into the sprayhead tube.  

When inserted properly, no more than two inches of spring should be visible.  Saw back and forth five or 

six times.

NOTE – In hard water areas, this may need to be done daily.  It will help prevent liming problems in the brewer 

and takes less than a minute.

10053.1 101508

FIG. 2  SPRAYHEAD

FIG. 3  DELIMING SPRING