Graco 332225D - LineLazer IV 200HS / 250SPS / 250DC Manuel D’Utilisation
Secondary Bead Tank
332225D
3
Secondary Bead Tank
1.
Remove any beads in existing bead tank. Release
all pressure on unit.
all pressure on unit.
2.
Loosen (but do not remove) 3 in. bolt (A) that holds
first tank to frame.
first tank to frame.
3.
Remove 3 in. bolt (B) on opposite side.
4.
Remove 1.25 in. bolt (C) from center strap mounting
hole. NOTE: The bolt will be used to secure both
straps once the second bead tank is in place.
hole. NOTE: The bolt will be used to secure both
straps once the second bead tank is in place.
5.
Place second bead tank (D) on supporting base with
outlet fittings facing compressor.
outlet fittings facing compressor.
6.
Place clamping band (E) around tank and secure
with hardware from frame.
with hardware from frame.
ti20563b
ti20705b
ti20562a
C
ti20561a
D
ti20560b