VIZIO TL-R480T Manuel D’Utilisation

 

 or Disable the DHCP server. If you disable the Server, you 

must have another DHCP server within your network or else you must manually 
configure the computer. 

 

 This field specifies the first of the addresses in the IP address 

pool. 192.168.1.100 is the default start address. 

 

 This field specifies the last of the addresses in the IP address 

pool. 192.168.1.199 is the default end address. 

 

 The Address Lease Time is the amount of time a network 

user will be allowed connection to the router with their current dynamic IP address. 
Enter the amount of time, in minutes, which the user will be "leased" this dynamic 
IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 
minutes. 

 

(Optional.) Suggest to input the IP address of the LAN port of 

the router, default value is 192.168.1.1 

 

 (Optional.) Input the domain name of your network. 

 

(Optional.) Input the DNS IP address provided by your ISP. Or 

consult your ISP. 

 

(Optional.) Input the IP address of another DNS server if your 

ISP provides two DNS servers. 

 To use the DHCP server function of the router, you must configure all computers 

on the LAN as "Obtain an IP Address automatically" mode. This function will take effect 
until the router reboots. 

This page shows Client Name, MAC Address, Assigned IP and Lease Time for each 
DHCP Client attached to the router (figure 5-14): 

 

Figure 5-14    DHCP Clients List 

 

The index of the DHCP Client   

 

 - The name of the DHCP client   

 

 - The MAC address of the DHCP client   

 

 - The IP address that the router has allocated to the DHCP client. 

 

 - The time of the DHCP client leased. Before the time is up, DHCP 

client will request to renew the lease automatically. 

You cannot change any of the values on this page. To update this page and to show the 
current attached devices, click on the Refresh button. 

 

- 22 -