VIZIO TL-R480T Manuel D’Utilisation

 

Figure 5-29  Remote Management 

 

 - Web browser access normally uses the standard HTTP 

service port 80. This router’s default remote management web port number is 80

.

 

For greater security, you can change the remote management web interface to a 
custom port by entering that number in the box provided. Choose a number 
between 1024 and 65534, but do not use the number of any common service port. 

 

 - This is the current address you will use when 

accessing your router from the Internet. The default IP address is 0.0.0.0. It means 
this function is disabled. To enable this function, change the default IP address to 
another IP address as desired.   

To access the router, you will type your router's WAN IP address into your browser's 
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port 
number. For example, if your Router's WAN address is 202.96.12.8 and you use port 
number 8080, enter in your browser: http://202.96.12.8:8080. You will be asked for the 
router's password. After successfully entering the password, you will be able to access 
the router's web-based utility. 

Be sure to change the router's default password to a very secure password. 

Using Advanced Security page (shown in figure 5-30), you can protect the router from 
being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN. 

 

- 35 -