Summit BIM70 Manuel D’Utilisation
10
Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter.
Never use an extension cord.
Failure to follow these instructions can result in fire,
electrical shock or death.
IMPORTANT: Do not kink or pinch the power supply cord between the ice maker and
wall or cabinet.
wall or cabinet.
Before you move your ice maker into its final location, it is important to make sure you
have the proper electrical connection.
have the proper electrical connection.
A standard electrical supply (115 VAC only, 60 Hz, 15 A), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
accordance with the National Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your ice maker, be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 amperes.
Recommended grounding method
For your personal safety, this appliance must be grounded. This appliance is equipped with a
power supply cord having a 3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle,
grounded in accordance with the National Electrical Code and local codes and ordinances. If
a mating wall receptacle is not available, it is the personal responsibility of the customer to
have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.
power supply cord having a 3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle,
grounded in accordance with the National Electrical Code and local codes and ordinances. If
a mating wall receptacle is not available, it is the personal responsibility of the customer to
have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.