Manualsbrain.com
  1. Manuels
  2. Marques
  3. SonicWALL
  4. Email Security 7.0 8000
  5. Manuel D’Utilisation

SonicWALL Email Security 7.0 8000 Manuel D’Utilisation

Télécharger
Page de 32
Getting Started Guide 7.0 | 9
 
Initial Setup and Configuration
This section contains the following sub-sections:
z
z
z
z
z
Apply Power to the SonicWALL Email Security
1. Connect the included standard power cord with the y-split power cord. 
2. Plug each of the y-split ends into a power supply on the back of the SonicWALL Email Security 
appliance. 
3. Plug the power cord into an appropriate power outlet.
4. Press the recessed power button on the front bezel to power on the appliance. The entire 
sequence may take several minutes to complete.
The Power LED 
 on the front panel lights up green when you power on the SonicWALL Email 
Security appliance. The HDD LED 
 lights up and may blink while the appliance performs a series 
of diagnostic tests. When the HDD LED is no longer lit, the SonicWALL Email Security appliance is 
ready for configuration. 
If the Alert light stays lit, ensure that BOTH of the power supplies on the back of the SonicWALL 
Email Security Appliance are plugged in (use the included y-split cable for this purpose).
Connect Directly to the SonicWALL Email Security Appliance 
The SonicWALL Email Security appliance comes pre-configured with an IP address of 
192.168.168.169. Before you can connect your administration station to it, you must configure 
your administration computer to have an address in the same subnet. 
1. Make a note of your computer’s current network settings. 
2. Set the computer you use to manage the SonicWALL Email Security appliance to have a static 
IP address in the 192.168.168.x range, such as 192.168.168.50 and a netmask of 
255.255.255.0. For help with setting up a static IP address on your computer, refer to 
“Troubleshooting” on page 20.
3. Using the supplied crossover cable and the administration computer, connect the computer’s 
LAN port to the LAN (1) port on the back of your SonicWALL Email Security appliance.
Login to the SonicWALL Email Security Appliance
1. Open a Web browser on the administration computer.
2. Enter http://192.168.168.169 (the default IP address of the SonicWALL Email Security 
appliance) in the Location or Address bar. The SonicWALL Email Security Web management 
login screen displays.
3