Siemens Welding System ST PCS 7 Manuel D’Utilisation

Industrial Ethernet

Siemens ST PCS 7 · November 2007

9

Industrial Ethernet FastConnect RJ45 Plugs are available in two 

versions:
• with 180° (straight) outgoing cable,
• with 90° (angled) cable outlet.
They are used for optimized connection of Industrial Ethernet 

FastConnect cables to data terminals and network components. 

The plugs have a rugged, industry-compatible metal housing 

that provides optimum protection against faults in data commu-

nication. The 4 integral insulation displacement contacts permit 

simple, fault-free contacting of the various types of FC cable. 

Following introduction of the stripped ends of the cables into the 

tipped-up barrel contacts, the latter are pressed down for secure 

contacting of the conductors.
The IE FC RJ45 Modular Outlet (Base Module) designed for 

transmission rates up to 1,000 Mbit/s consists of a rugged metal 

housing with IP40 degree of protection which is suitable for both 

DIN rail and wall mounting. It has 8 barrel contacts for connect-

ing 8-core Industrial Ethernet FC installation cables and an inter-

face for the replaceable insert, e.g.:
• IE FC RJ45 Modular Outlet Insert 2FE with 2 x RJ45 sockets 

for 100 Mbit/s

• IE FC RJ45 Modular Outlet Insert 1GE with 1 x RJ45 socket for 

1,000 Mbit/s

■

Order No.

For universal use, for connection 

to IE FC Outlet RJ45 or IE FC 

RJ45, 4-core (2 x 2), shielded
• Cut-to-length;

max. delivery length 1,000 m, 

minimum ordering length 20 m

• Preferred length 1,000 m

For universal use, for connection 

to IE FC Modular Outlet RJ45, 

8-core (4 x 2), shielded
• Cut-to-length;

max. delivery length 1,000 m, 

minimum ordering length 20 m

Preadjusted stripping tool for fast 

stripping of Industrial Ethernet FC 

cables

Spare blade cassettes for the 

FC stripping tool, 5 cassettes

RJ45 plug connector for Industrial 

Ethernet with a rugged metal 

housing and integrated insulation 

displacement contacts for con-

necting Industrial Ethernet FC 

installation cables; with 180° 

cable outlet; for network compo-

nents and CPs/CPUs with Indus-

trial Ethernet interface
• 1 pack = 1 unit

• 1 pack = 10 units

• 1 pack = 50 units

RJ45 plug connector for Industrial 

Ethernet with a rugged metal 

housing and integrated insulation 

displacement contacts for con-

necting Industrial Ethernet FC 

installation cables; with 90° cable 

outlet
• 1 pack = 1 unit

• 1 pack = 10 units

• 1 pack = 50 units

FastConnect RJ45 Outlet for 

Industrial Ethernet with a replace-

able insert for 1 x 1,000 Mbit/s 

interface

FastConnect RJ45 Outlet for 

Industrial Ethernet with a replace-

able insert for 2 x 100 Mbit/s inter-

face
For further IE FC RJ45 Modular 

Outlet versions and replaceable 

inserts, see Catalog IK PI 

Network architecture, compo-

nents, configurations, installation
• German

• English

■

Order No.

© Siemens AG 2007