PEAK-System Technik PCAN-DONGLE IPEH-002015 Manuel D’Utilisation

PCAN-Dongle (ISO) – User Manual

Figure 4: Selection of the CAN specific parameters

If no entry is in the list "Available CAN hardware" (for example at

the first program start), you need to add one:

1. Press the button Add. The dialog box "Add CAN hardware"

appears.

2. Select the connected hardware and the operating mode

from the list "Type of CAN hardware". If the mode of the

parallel interface is set to ECP in the PC's BIOS setup, you
can register the PCAN-Dongle as "PEAK Dongle-CAN SJA

EPP".