Novatel GNSS Receiver and Antenna SMART-AG Manuel D’Utilisation
Foreword
SMART-AG User Manual Rev 2
17
Conventions
Some simple conventions used in this manual are:
This is a notebox that contains important information.
•
The letter H in the Offset columns of the commands and logs tables represents the
header length for that command or log. Refer to the OEMV Family Firmware
Reference Manual for ASCII and binary header details.
header length for that command or log. Refer to the OEMV Family Firmware
Reference Manual for ASCII and binary header details.
•
The number following 0x is a hexadecimal number.
•
Command descriptions’ brackets, [ ], represent the optionality of parameters.
•
In tables where values are missing they are assumed to be reserved for future use.
•
Status words are output as hexadecimal numbers and must be converted to binary
format (and in some cases then also to decimal). For an example of this type of
conversion, please refer to the RANGE log in the OEMV Family Firmware
Reference Manual.
Conversions and their binary or decimal results are always read from right to left.
For a complete list of hexadecimal, binary and decimal equivalents, please refer to
the Unit Conversion section of the GPS+ Reference Manual available on our
website at
format (and in some cases then also to decimal). For an example of this type of
conversion, please refer to the RANGE log in the OEMV Family Firmware
Reference Manual.
Conversions and their binary or decimal results are always read from right to left.
For a complete list of hexadecimal, binary and decimal equivalents, please refer to
the Unit Conversion section of the GPS+ Reference Manual available on our
website at
http://www.novatel.com/support/docupdates.htm
See also Section B.1, Syntax Conventions on Page 57 for more syntax when entering commands.