Motion CL900 FWS-001 Manuel D’Utilisation

56    

Chapter 3

Caring for your CL900

Caring for the pen

Motion Computing maintains a 

 and chemical disinfectants 

on its website. You can also purchase protective display films from the 

 

Accessories

 page.

•

If liquid is spilled on the display, wipe it up immediately with a soft cloth like the one 
provided with the tablet.

•

Use only the CL900 pen to write on the display. Any other object could damage the 
display surface.

•

Protect the display surface from unnecessary contact by using a case when transporting 
the tablet PC. Motion Computing sells a variety of cases for the CL900. You can purchase 
one at the 

Accessories

 page.

•

Cover the display with a protective display film that you can purchase at the 

 

Accessories

 page. 

•

Avoid exposing the display to direct sunlight for long periods of time.

Do not use any corrosive or abrasive cleaners to clean or disinfect the tablet. A 

 and chemical disinfectants is available on the 

Caring for the pen

If you use a pen with your tablet:

•

Store the pen in the pen storage drawer, tip down, or in a case when not in use. 

•

Avoid storing the pen vertically on its tip (when not in the storage drawer). It can 
damage the pen-to-digitizer function. 

•

Keep the pen away from any liquid because the pen contains electronic components 
that could be damaged when wet.

•

In certain environments, particles or debris can stick to the pen tip or the tablet PC 
display. Make sure you wipe off the pen with a soft cloth to avoid scratching the display. 

•

Under normal conditions, the CL900 pen tip should not require replacement. However, 
extra pen tips are available if you want to replace one. 

To order pens or new pen tips, go to 

Caring for the tablet battery

To maximize the performance of the battery, condition the battery once a month. To 

condition it, run the tablet on battery power until the battery’s charge level drops below 20 

percent. Then use AC power until it is fully charged.

You will receive a message if the tablet detects that the battery needs conditioning.

For more information about batteries, see “Using the battery” on page 46.