Maxon Telecom MODMAX MM-6280IND Manuel D’Utilisation
Extended AT Commands Manual
Page 38 of 70
2009-06-25
NOTE: If
the
selected
<mem1>
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs,
SMS-STATUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of
different SM types. TE application can recognize the response format by examining the third response
parameter.
different SM types. TE application can recognize the response format by examining the third response
parameter.
Table 9. +CMGL action command syntax
Command
Possible response(s)
+CMGL[=<stat
>]
>]
if text mode (+CMGF=1), command successful and SMS-SUBMITs and/or SMS-
DELIVERs:
DELIVERs:
+CMGL:<index>,<stat>,<oa/da>,[<callback_num>],<alpha>,[<scts>]
[,<t
ooa/toda>,<length>]<CR><LF><data>[<CR><LF>
+CMGL:<index>,<stat>,<da/oa>,[<callback_num>],<alpha>,<scts>
[,<too
a/toda>,<length>]<CR><LF><data>[...]]
if text mode (+CMGF=1), command successful and SMS-STATUS-REPORTs:
+CMGL: <index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
[...]]
if text mode (+CMGF=1), command successful and SMS-COMMANDs:
+CMGL: <index>,<stat>,<fo>,<ct>[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<ct>[...]]
if text mode (+CMGF=1), command successful and CBM storage:
+CMGL: <index>,<stat>,<sn>,<mid>,<page>,<pages>
<CR><LF><data>[<CR><LF>
+CMGL: <index>,<stat>,<sn>,<mid>,<page>,<pages>
<CR><LF><data>[...]]
otherwise:
+CMS ERROR: <err>
+CMS ERROR: <err>
+CMGL=?
+CMGL: (
list of supported <stat>s)
8.1.1.12.
Read Message +CMGR
Execution command returns message with location value <index> from message storage <mem1>
to the TE. About text mode parameters in italics, refer command Show Text Mode Parameters
+CSDH
to the TE. About text mode parameters in italics, refer command Show Text Mode Parameters
+CSDH
. If status of the message is 'received unread', status in the storage changes to 'received
read'. If reading fails, final result code +CMS ERROR: <err> is returned. See chapter Message
Service Failure Result Code for <err> values.
Table 10. +CMGR action command syntax
Service Failure Result Code for <err> values.
Table 10. +CMGR action command syntax
Command
Possible response(s)
+CMGR=<inde
x>
x>
if text mode (+CMGF=1), command successful and SMS-DELIVER:
+CMGR:<stat>,<oa>,[
<callback_num>],
<alpha>,<scts>
[,<tooa>,<fo
>,<pid>,<dcs>, <sca>,<tosca>,<length>]<CR><LF><data>
if text mode (+CMGF=1), command successful and SMS-SUBMIT:
if text mode (+CMGF=1), command successful and SMS-SUBMIT:
+CMGR:<stat>,<da>,[
<callback_num>],
<alpha>
[,<toda>,<fo>,<pid>