Maxon Telecom MODMAX MM-6280IND Manuel D’Utilisation
Extended AT Commands Manual
Page 69 of 70
2009-06-25
1 5 . D M C O M M A N D ( D I A G N O S T I C M O D E )
All the AT command set can be used at UART2 DM port with Async-HDLC format except the
periodic report command set such as RFINFO and ANTLVL. The DM command set has the
command/response structure in Async-HDLC format. The command/response packet format is
described in the following tables.
periodic report command set such as RFINFO and ANTLVL. The DM command set has the
command/response structure in Async-HDLC format. The command/response packet format is
described in the following tables.
NOTE: The last character of the Request Field should be “0x0D”.
Table 15.88 Request packet
Field
Length(bytes) Description
Command code
1
Cmd Code (0xC8)
Request field
Variable
ASCII Cmd (This field should finish with 0x0d)
Frame check
2 16-bit
CRC
Ending flag
1 0x7E
Table 15.89 Response packet
Field
Length(bytes) Description
Command code
1 Cmd
Code(0xC8)
Length
2 Packet
length
Response Filed
Variable ASCII
Frame check
2 16-bit
CRC
Ending flag
1 0x7E