Luma Comfort Fan EC45S Manuel D’Utilisation
6
Maintenance
Regular cleaning and maintenance is an essential step in maintaining the longevity of your tower
evaporative cooler and ensuring that it operates free of defects. Maintain your evaporative cooler by
following these steps:
General Maintenance Instructions
Always unplug the evaporative cooler from the power supply before servicing or cleaning.
Use a soft cloth and a mild soap and warm w
ater solution to clean the unit’s exterior. Do not use
harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the
evaporative cooler.
evaporative cooler.
Thoroughly dry all of the cooler’s parts with a soft cloth before reconnecting the unit to the power
supply.
supply.
If the evaporative cooler will not be in use for an extended period of time, place the unit back in its
original carton and keep it stored in a clean, dry place.
original carton and keep it stored in a clean, dry place.
The evaporative cooler’s filter and cooling pad will need to be removed prior to cleaning. Once all
of the different components have been cleaned, place them back into the unit in this order: water
tank, cooling pad and dust filter.
of the different components have been cleaned, place them back into the unit in this order: water
tank, cooling pad and dust filter.
Cleaning the Dust Filter & Cooling Pad
To prevent clogging of the dust filter, we recommend cleaning the filter at least once a month.
To clean the dust filter, remove it from the back of the unit by pushing down on the two tabs
located above the filter and pull it out. Gently scrub it with a soft brush and rinse with water.
Allow it to thoroughly air dry before placing it back in the unit.
located above the filter and pull it out. Gently scrub it with a soft brush and rinse with water.
Allow it to thoroughly air dry before placing it back in the unit.
To clean the cooling pad, first remove the dust filter to expose the pad. Remove the cooling pad
from the back of the evaporative cooler, rinse it with clean water and allow it to thoroughly air dry
before placing it back into the unit.
from the back of the evaporative cooler, rinse it with clean water and allow it to thoroughly air dry
before placing it back into the unit.